Sulzer Mixpac Dual Cartridges for Adhesive Dispensing

Two-Part Cartridges

Sulzer Mixpac cartridges are available in ratios of 1:1, 2:1, 3:2, 4:1 and 10:1 with capacities ranging from 9 ml to 1500 ml and are made from polypropylene (PP), nylon (PA 6) or polyester (PBT). Cartridges are used for dispensing two-part epoxy, polyurethane, silicone, acrylic and other adhesive systems. Cartridges can be used with pneumatic or manual dispensing guns from MIXPAC, TAH COX, Newborn, Meritool and others.

A complete cartridge kit contains pistons, plugs and other accessories. The table below summarizes available MIXPAC configurations¹. See listings under NEW! section for TAH and Sulzer Quadro products.

Click on any cartridge or kit to go to the detailed product page.

Cartridge Ratio	Volume (ml)	Description	Old Kit Number	New Kit Number
1:1 Ratio	50 ml	PP	MP 051-01-09	AA 050-01-10-01
	50 ml	PA6 (Nylon)	MP 051-01-18	AA 050-01-30-01
	200 ml	PP	MP 200-01-14
	200 ml	PA6 (Nylon)	MP 201-01-18
	400 ml	PP	MP 400-01-14
	400 ml	PA6 (Nylon)	MP 401-01-18
2:1 Ratio	50 ml	PP	MP 051-02-09
	50 ml	PA6 (Nylon)	MP 051-02-18
	200 ml	PP	MP 200-02-14
	400 ml	PP	MP 400-02-14
4:1 Ratio	50 ml	PP	MP 051-04-09
	50 ml	PA6 (Nylon)	MP 051-04-18
	200 ml	PP	MP 200-04-14
	400 ml	PP	MP 400-04-14
10:1 Ratio	50 ml	PP	MP 050-10-09
	50 ml	PA6	MP 050-10-18
	200 ml	PP	MP 200-10-A1
	200 ml	PBT	MP 200-10-A2
	400 ml	PP	MP 400-10-14
	400 ml	PBT PA6	MP 403-10-06

¹Nominal volumes. See product literature for exact volumes.