Sulzer Quadro® Mixer tips and Accessories

Sulzer Quadro® Retaining nuts

Sulzer Quadro® retaining nuts are used to attach the Sulzer Quadro® disposable mixers with bell inlet onto cartridges or onto two-component machines.

Part Number	Type	Material	Suitable for use with mixer
300 301	nut 8.7PP 7/8" x 9	PP	300 002, 300 006, 300 014, 300 018, 300.374, 300.375, 300 386, 300 387
300 302	nut 10.7PP 7/8" x 9	PP	300 022, 300.376, 300.377, 300 388, 300 389
300 303	nut 8.7PP 7/8" x 14 double lead	PP	300 002, 300 006, 300 014, 300 018, 300 374, 300 375, 300 386, 300 387
300 304	nut 10.7PP 7/8" x 14 double lead	PP	300 022, 300.376, 300.377, 300 388, 300 389

Sulzer Quadro ® Ribbon adapter

The Sulzer Quadro ® Ribbon adapter is used for dispensing wide adhesive beads. The outlet can be adjusted, stepwise, according to the specific requirement.

ribbon adapter

Part Number	Type	Material	Suitable for use with mixer
300 326	0.5"-1.5"	PE	300 018, 300 374, 300 375, 300 386, 300 387

Sulzer Quadro ® Needle adapter

The Sulzer Quadro ® Needle adapter is used for the precise dispensing of small resin quantities. The outlet diameter can be adjusted, stepwise, according to the specific requirement.

needle adapter

Part Number	Type	Material	Suitable for use with mixer
300 363	Ø 0.8/1.6mm	PP	300 006, 300 018, 300 022, 300 374, 300 375, 300 376, 300 377, 300 386, 300 387, 300 388, 300 389

Sulzer Quadro ® Bent mixer tip

The Bent mixer Tip is especially designed for dental applications.

bent tip

Part Number	Type	Material	Suitable for use with mixer
300 811	KG 5,4	PP	300 809

Sulzer Quadro ® mixer extension tube

The mixer extension tube can be used to dispense into holes or to inaccessible places.

extension tube

Part Number	Type	ID mm	Material	Length mm	Suitable for use with mixer
300 812	7/195PE	7	PE	195	300 031, 300 030, 300 327 300 339, 300 823, 300 801 300 807, 301 334

Sulzer Quadro® Shrouds

Sulzer Quadro® shrouds are used with Sulzer Quadro® disposable mixers that are fitted with a bell inlet. The shrouds allow mixers to work at high pressures with maximum safety and performance. We suggest that Sulzer Quadro® mixers are fitted with shrouds if they are to be used at pressures above 25 bar (360psi).

shrouds

Part Number	Type	Material	Suitable For Use With Bell Inlet Mixer Part Number
300 402	5.3/24	aluminum / stainless steel	300 002
300 406	7.5/24z	aluminum	300 006
300 410	8.7/24	aluminum	300 014
300 418	8.7/24z	aluminum	300 018, 300 374, 300 386
300 414	10.7/24z	aluminum / brass	300 022, 300 376, 300 388
300 419	8.7/32	aluminum	300 375, 300 387
300 420	10.7/32	brass	300 377, 300 389

Sulzer Quadro® Perforated sleeves

The Sulzer Quadro® Perforated sleeves are used to set chemical anchors in brick and cinder block walls. The entire range of Perforated Sleeves have enhanced "ooze" holes to help insure an ideal distribution of the Adhesive over the entire length of the sleeve. This results in an extremely strong bond between the Anchor and the masonry wall. The stiffness of the perforated sleeves is very high to allow easy insertion into a drilled hole. The sleeves are made of polypropylene and are available in various sizes.

Ideal distribution of the Adhesive over the entire length of the sleeve
Closure cap in order to avoid Adhesive coming out on the front side
Easy to insert due to high stiffness of the sleeves

Perforated sleeves for use with chemical anchoring systems

PP grey

15 x 85
15 x 130
20 x 85
12 x 50

301 257
301 255
301 259
301 253

Return to New Products page