Series 160A Plastic Spiral Bell Mixer for ProTips

TAH Series 160A mixing nozzles accept ProTips, thereby combining the benefits of the disposable TAH Series 160 static mixer with the advantage of flexibiltiy in the adhesive material discharge. Mixers equipped with the "A" tip allow the user to either apply adhesive in a small bead or applying material in a wide variety of widths when using ProTips.

Clean-up simply involves removing the mixer and wiping the manifold face clean.

A metal jacket is recommended when the working pressure inside the nozzle exceeds 150 psi (10 bar).

Accessories

Adapter
Bell Inlet
Series 163A ProTip Dispensing Tips
Retaining Nut
Manifold
One-Piece Jacket
Support Washer

SPECIFICATION

Element: Polyplas™
Housing: Polypropylene

Part No.	No. of	Element	Housing	Housing	Housing	Outlet Tip	Outlet Tip
	Elements	Diameter	Length	OD	Pressure Max	Orifice	Style
		mm	cm	mm	(Bar @ 23°C)	mm
160A-718	18	8.00	17.68	11.710	23	2.54	ProTip
160A-724	24	8.00	22.45	11.710	23	2.54	ProTip
160A-818	18	9.30	18.49	12.950	21	3.05	ProTip
160A-824	24	9.30	23.24	12.950	21	3.05	ProTip
161A-218	18	12.65	23.06	16.760	19	4.57	ProTip
161A-224	24	12.65	24.96	16.760	19	4.57	ProTip

Part No.	Element	Housing	Housing	Housing	Outlet Tip
	Diameter	Length	OD	Pressure Max	Orifice
	inch	inch	inch	(Psi @ 75°F)	inch
160A-718	0.314	6.96	0.461	330	0.10
160A-724	0.314	8.84	0.461	330	0.10
160A-818	0.366	7.28	0.510	300	0.12
160A-824	0.366	9.15	0.510	300	0.12
161A-218	0.497	9.08	0.660	270	0.18
161A-224	0.497	11.60	0.660	270	0.18

Back to Main TAH page